📘 ❞ Total Station Instruction manual ❝ كتاب

عن كتاب Total Station Instruction manual:
Total Station
Instruction
manual
PowerTopoLite
for R-400 Series
R-400series

CONTENTS
GENERAL
Contents 1
Exemption clause 4
Copyright 4
Display and Keyboard 5
Operation Key 5
Function Key 6
Display combination of MODE A or MODE B 7
Alphanumeric Input 7
1. INTRODUCTION 8
1.1 Introduction 8
1.2 Before using the PowerTopoLite manual 9
2. ACCESSING POWERTOPOLITE 11
2.1 How to access PowerTopoLite 11
2.2 Allocation of each PowerTopoLite Function key 12
2.3 Typical Function keys of PowerTopoLite 13
3. FILE MANAGER 14
3.1 Information of the remaining memory available 14
3.2 Creation of a new Job 14
3.3 Selection of a Job name 15
3.3.1 Selection of a Job 15
3.3.2 Selection by a Job name input 15
3.4 Deletion of a Job name 16
3.4.1 Deletion from a Job list 16
3.4.2 Deletion from a Job name search 17
3.5 All Clear 17
4. MEASURE 18
4.1 Station setup [By Rectangular Coordinates] 19
4.1.1 Point name input 19
4.1.2 Coordinates, X, Y, Z, IH, and PC input 20
4.1.3 Point selection from the list 21
4.2 Station Orientation 23
4.3 Function of MEASRE screen 24
4.4 Remote, Offset, Station, and H. angle function 25
4.4.1 Remote 25
4.4.2 Offset 26
4.4.3 Station 28
4.4.4 H. angle 28
4.5 Station setup [By Polar Coordinates] 28
4.5.1 Point name input 29
4.5.2 IH, TEMP, PRESS, ppm and PC input 29
4.6 Station Orientation 30
4.7 Function of MEASURE screen 31
2
4.8 Offset 32
4.9 Station setup [By Rectangular & Polar Coordinates] 33
4.10 Station Orientation 34
4.11 Function of MEASURE screen 34
4.12 IH Measurement 37
5. VIEW AND EDIT 38
5.1 Graphical View 38
5.2 Create the Rectangular Point 39
5.3 Edit the Data 39
5.4 Point Code List 40
5.4.1 Point Code 40
5.4.2 Point Code Create 42
5.4.3 Point Code Edit 43
6. FREE STATIONING 44
6.1 Stationing by more than 3 known points 44
6.2 Stationing by two known points 47
7. STAKE OUT 50
7.1 Stake Out 50
7.2 Point to Line 54
7.3 Point to Arc 57
7.3.1 Three point 58
7.3.2 Circle radius 60
8. CALCULATIONS 62
8.1 Cogo 62
8.1.1 Inverse 63
8.1.2 Point Coordinates 66
8.1.2.1 Point Coordinates, Distance and H. angle 66
8.1.2.2 Distance and H. angle 68
8.1.2.3 H. angle input 69
8.1.3 Circle Radius 70
8.1.4 Line-Arc intersection 72
8.1.5 Line-line intersection 74
8.1.6 Arc-Arc intersection 76
8.1.7 Distance offset 78
8.1.8 Point distance offset 80
8.1.9 Arc distance offset 82
8.2 2D Surface 85
8.3 3D Surface and volume 88
8.4 REM 92
8.4.1 General pictures of measurement 92
9. VPM (Virtual Plane Measurement) 93
10. RDM (Remote Distance Measurement) 96
10.1 PH input